Details
"Now Available" the CARVER Custom 9MM 4 port compensator for your 2.0 M&P APEX 5.0" barrel.
These comps were designed to fit the countour of the 2.0 Pro or L 5.0" M&P slide and to appear as an extension of the slide. The changes made in the configuration of the slide have been added to the "new" CARVER comp. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.
Benefits of this compensator include:
- Large expansion chamber leading into 3 retaining ports
- Perfect for 9MM Major Handloads
- Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
- Comp weight 1.4 oz
- Guiderod channel under compensator
- Controls muzzle flip and recoil up to 45% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
- Stylish and effective!!
- Excellent for IPSC, Steel Challenge or "fun" shooting
- The 3 Port Comp is recommended when shooting minor handloads or factory ammunition such as 9MM 124 grain.
- The 3 Port Comp can also be used for 9MM Major loads as well.
The comps are threaded for 1/2 x 28 tpi barrels. They were designed to fit the APEX threaded barrel (105-060) or any of the other APEX threaded barrels for the 5.0" M&P.
- 2.0 M&P Pro
- 2.0 M&P L
When using the CARVER Custom compensator system, you will need to use a lighter recoil spring to compromise the slide speed since the compensators are so efficient. The comp will reduce the amount of energy normally utilized by the slide to recycle. Springs recommended with CARVER comps are:
Ports | Factory | +P Ammo | Major |
2 | 11-13 | 13-15 | Not Rec |
3 | 11-13 | 13-15 | 15-18 |
4 | Not Rec | 13-15 | 14-17 |