Details
"Now Available" the CARVER Custom 9MM 3 port compensator to fit the Apex 4.25" threaded barrel for both the 1.0 and 2.0 Full Size models.
These comps were designed to fit the countour of the 1.0 and the 2.0 Full Size (4.25") M&P slides and to appear as an extension of the slide. The configuration of the slide has been added to the "new" CARVER comp. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.
Benefits of this compensator include:
- Large expansion chamber leading into 2 retaining ports
- Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
- Comp weight 1.1 oz
- Guiderod channel under compensator
- Controls muzzle flip and recoil up to 40% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
- Stylish and effective!!
- Excellent for IPSC, Steel Challenge or "fun" shooting
- The 3 Port Comp is recommended when shooting minor to +P factory or handload equivalent ammunition such as 9MM 115 grain- 147 Grain.
The comps are threaded for 1/2 x 28 tpi barrels. They were designed to fit the APEX threaded barrel (105-061) or any of the other APEX threaded barrels for the 4.25" M&P.
- 1.0 M&P Ful Size
- 2.0 M&P Full Size
When using the CARVER Custom compensator system, you will need to use a lighter recoil spring to compromise the slide speed since the compensators are so efficient. The comp will reduce the amount of energy normally utilized by the slide to recycle. Springs recommended with CARVER comps are:
- 11-13 lb spring for soft 9MM ammunition up to 130K PF Recoil springs
- 12-13 lb spring for +P 9MM ammunition up to 150K PF
- 14-17 lb spring for 9MM Major ammo greater than 165 PF
NOTICE: 115 Grain Factory ammunition willnot function the slide properly when using our 3 Port Comp with a 4.25" full Size model. The compensator is so efficient that the use of an 11 lb spring or more is recommended. If you have questions, please contact us at sales@carvercustom.com