Details
The "NEW" CARVER Angle C-More Model has been designed to fit any of the following Glock Models including Gen 4's and Gen 5's: G17, G17L, G17C, G22, G22C, G24, G24C, G31, G31C, G34, G35 and G37 without doing any modifications to your Glock.
All CARVER Mounting Systems have interchangable parts to allow easy conversion to other CARVER Mount models including the Angle Mount. NOTE: Our tests have shown that lowering the ejection port with the use of the CARVER Angle mount is "NOT" necessary.
Like all of our CARVER Mounting systems, installation is easy and should not require gunsmith assistance. No modifications to your receiver required.
Installation requires the following:
1. Make sure your handgun is unloaded, remove the magazine
2. Remove the slide
3. Remove the factory trigger pin
4. Remove the two insert screws and the insert from the underlug of the mount
5. Slide the mount onto your receiver, aligning the trigger pin hole with each of the sideplates
6. Using the threaded trigger pin supplied, insert into through the right sideplate leg through the trigger pin hole and thread into the left sideplate lug. No need to hammer in, just push in. Leave loose until later.
7. Insert underlug insert removed in step 4 and tighten screws. No loctite needed.
8. Snug your trigger pin. Don't overtighten. Note: You may want to use red loctite on the threads only to avoid vibration from looseing the trigger pin.
9. Install your C-More slideride
10.Reinstall your slide
Adjustments to the Cmore are easy, following the instructions provided by Cmore. Access to the adjustment screws is available on the "left" side of the mount. All parts of this mount are CNC machined from high quality aircraft aluminum and comes with a Life Time Warranty against manufacturing or material flaws. The CARVER Angle mounts are available in either black or silver Type 2 Anodizing.
If you want a different color, we will provide Cerakoting of the mount parts for an additional fee as noted. CARVER Thumbrest, optional, can be installed on this mount as well. If you have questions, please contact us at sales@carvercustom.com